A&D Weighing Indicator AD-4405, Instruction Manual

Page: 34 / 80

Page 32
AD-4405 Weighing Indicator
6.3. 6.3. 6.3. 6.3. CF CF CF CF- - - -Functions Functions Functions Functions
Item
Parameter
Description
*
0
No limitation
Cf00
Zero tracking width,
motion detection
condition
1
Use limitation at F01, F02, F03, F27 and F28.
*
0
2% of CAP, Tare limit is 100 % CAP
1 10% of CAP, Tare limit is 100 % CAP
2 3% of CAP, Tare limit is 50 % CAP
Cf01
Zero range
Turning display on, the
range to zero display.
3 4% of CAP, Tare limit is 50 % CAP
0 Not to zero when turning the display on.
*
1
10% of CAP
2
3% of CAP
Cf02
Power on zero range
Turning the display on,
the range to zero display.
3
4% of CAP
0
Gross when displaying gross.
1
Gross
Cf03
Zero tracking
*
2
Gross or Net when displaying net.
TARE, ZERO in motion / TARE at negative gross
*
0
Not accepted / Not accepted
1
Execute / Not accepted
2
Not accepted / Execute
Cf04
TARE, ZERO in motion /
TARE at negative gross
value
3
Execute / Execute
*
0
Not to output data at unstable value or overload.
Effective in key mode.
Cf05
Output on overload and
unstable state.
1
To output data always.
GROSS / NET / TARE / Preset TARE
*
0
GR / NT / TR / TR
1 GR / NT / TR / PT
Cf06
Header 2
2 G_ / N_ / T_ / PT (_: Space 20h)
*
0
Two digits Cf07
Number of unit digits 1
Three digits
Serial output data
*
0
Not used (Ineffective)
Cf08
Accumulation function 1
Used (Effective)
*
0
Used (Effective) Cf09
Digital Tare(PT) 1 Not used (Ineffective)
CAP : maximum capacity *: Initial settings
Power on ZERO (CF02)
Cf02 0
After power on, the weight display starts immediately.
Cf02 1 , 2 , 3 When the zero range is exceeded at power on, ------ is displayed.
Press the
ESC
key to start the weight display.
6.3. CF-Functions