A&D Weighing Indicator AD-4405, Instruction Manual

Page: 6 / 80

Page 4
AD-4405 Weighing Indicator
2.
2. 2.
2. Intro
Intro Intro
Introduction
duction duction
duction
The AD-4405 is a weighing indicator that amplifies signals from a load cell, converts
it to digital data and displays it as a mass value.
This indicator has the following performance:
Input sensitivity: ......................... 0.25
m
V/division.
Maximum display: ...................... 40000 divisions.
Refresh rate of the display: ........ 10 times/second approximately.
Input voltage range: ................... -1 mV ~ +15 mV.
The following standard functions are available:
The HiHi / Hi / OK / Lo / LoLo limit comparison to check a mass value.
The setpoint comparison for batching applications.
The counting function for piece counting.
The preset tare function.
There are four code memories to store the above mentioned data.
The accumulation function to totalize these mass values and to count the
number of accumulations.
The hold function enables weighing a living animal.
UFC (Universal Flex Coms) function to customize the protocol of the printing
format as well as outputting data using the serial interface.
0
-
9
keys enables easy operation, such as setting of comparator values.
Built-in calendar clock with backup battery.
There are the following interfaces:
One interface can be installed in the indicator at a time.
An RS-232C serial interface is standard, to communicate with a computer,
printer or a remote display. This interface outputs data and can request weight
data, enter parameters and control the state of the indicator.
RS-422/485 and 3-Relay Outputs (Option: OP-03)
RS-232C, 3-Relay Outputs and 3-Control Inputs (Option: OP-05)
RS-232C, Current Loop Output, 3-Relay Outputs and 1-Control Input (Option:
OP-08)
Analog Output (4-20mA) (Option: OP-07)
There is optional dot matrix impact printer. (OP-06)
The calibration function includes the following functions:
Setting of the minimum division (weighing interval) and the maximum capacity.
Zero and span calibration.
The weighing range function of the multi-interval weighing instrument (scale).
Digital linearization function.
Gravity compensation function.
2. Introduction