![background image](http://html1.mh-extra.com/html/aandd/sv-10/sv-10_instruction-manual_446155022.webp)
20
5-3 Changing Units
The units of viscosity available are: mPa
⋅
s (millipascal second),
Pa
⋅
s (Pascal second),
cP
(Centipoise),
P
(Poise).
The correlation of the units are as follows: 1 mPa
⋅
s = 0.001 Pa
⋅
s = 1 cP =0.01 P
The units of temperature available are: °C (Celsius) and °F (Fahrenheit).
The unit selected upon power-on depends on the function setting. The unit selected at the factory
before shipment is as shown below.
Model Viscosity
Temperature
SV-10 mPa
・
s
SV-100 Pa
・
s
°C
Use the MODE key to change units. Each time the MODE key is pressed, units are switched as below:
Note that the unit of temperature is fixed in the function setting.
SV-10
In the function setting, mPa
⋅
s or Pa
⋅
s is selected:
In the function setting, cP or P is selected:
SV-100
Note
While the measurement is being performed using the graphing program RsVisco, unit
changes using the MODE key is not available.
With the function setting "
fnc 1
", pressing the MODE key during measurement will display
the measurement elapsed time.