A&D HW-G Series, Instruction Manual

Page: 37 / 71

HW-G Instruction Manual Page 35
HW-G OZIM v1a
Step 8 Press the
MODE
switch to display the HI,
flashing, (of the final value).
Step 9 Set the final value using the following
switches:-
^
switch Selecting the value of a digit.
<
switch Selecting a digit.
Step 10 Press the
ENTER
switch to store the new
parameter and display the blinking OK
(of preliminary value).
Step 11 Set the preliminary value using the following
switches.
^
switch Selecting the value of a digit.
<
switch Selecting a digit.
Step 12 Press the
ENTER
switch to store the new
parameter and display the blinking LO
(of zero band).
Step 13 Set a zero band which is greater than the
tare value, using the following switches.
^
switch Selecting the value of a digit.
<
switch Selecting a digit.
Step 14 Press the
ENTER
switch to store the new
parameter and display the weighing mode.