A&D HR-202i, Instruction Manual

Page: 14 / 62

12
5.2.
Changing the Units
The units or modes can be selected and stored in the function table. The sequence of
displaying these can be arranged to fit the frequency of use.
The units stored are maintained in non-volatile memory, even if the AC adapter is removed.
1 Press
and hold the
RANGE
key until
ba5fnc
of the
function table is displayed in the weighing mode, then
release the key.
2 Press
the
RANGE
key several times to display
Unit
.
3 Press
the
PRINT
key to enter the unit selection mode.
4 Specify a unit or mode in the order to be displayed
using the following keys.
RANGE
key ....... To display the units sequentially.
RE-ZERO
key .... To specify a unit or mode.
The stabilization indicator
appears when the displayed unit or
mode is specified.
Examples
Unit Display
Gram g
Milligram mg
Counting mode pcs
Percent mode %
5 Press
the
PRINT
key to store the units or modes.
The balance displays
end
and then displays the next
menu item of the function table.
6 Press
the
CAL
key to exit the function table. Then
the balance returns to the weighing mode with the
selected unit.
Displays the units
sequentially
Examples
Press and hold
Press
several times