24
Automatic M+ Accumulation Mode
M+
Accumulation can also be done automatically each time you count a different
batch, As soon as you have a stable count, it will be added to the
M+
memory and
the scale will beep
. The weight display will have to return to near zero before
another count can be added.
Automatic
M+
accumulation is set by F-Function
f-03-01
at “
1
”.
Only positive counts can be added. If F-Function
f-03-02
is set at “
1
” (to accept
negative count data), it will be ignored.
Once there is an automatic
M+
accumulation, the display must return to less than
+5d before another count can be accumulated.
6-2. Viewing the M+ TOTAL
1. Press the TOTAL key.
The count display will show the total
count and the TOTAL annunciator
will come ON.
The number of additions to the
M+
memory is also shown.
2. Press the TOTAL key again.
The display will return to normal.
6-3. Clearing the M+ TOTAL
1. Press and hold the C key, then press
the TOTAL key – release both.
2. The scale will clear the
M+
memory, and the TOTAL annunciator and the
M+
annunciator will go OFF.
6-4. The M- Function
The scale can subtract count data from
M+
memory by using the
½
key.
Set the F-Function
f-09-01
=‘
1
’ to use the
½
key as M- key.
This function is not to clear the last
M+
addition, but to subtract count data instead
of addition. The number of additions is increased.
There is no automatic
M-
function.
TOTAL
C
+
The RESET key does not clear the total data.
The total data is held in memory, even if AC/Battery power to
scale is interrupted.
TOTAL
TOTAL Count
Number of additions to
M+
memory
888.8
1234
COUNT
TOTAL
M+
TOTAL
annunciator
comes ON.
WEIGHT UNIT WEIGHT
STABLE
TARE
ENTERED
ZERO
888
0.000
8
8
8.8.8.8.8
7
Summary of Contents for HC-15Ki
Page 1: ...Counting Scale HC 30Ki HC 15Ki HC 6Ki HC 3Ki WM PD4001164 ...
Page 58: ...56 World map ...
Page 59: ... blank page ...
Page 60: ......
