A&D HC-15Ki Instruction Manual Download Page 21

Page: 21 / 60

4-2. To Clear TARE

Either:

1. Have nothing on the weighing pan.

If the ZERO indicator is not displayed,

press the ZERO key to zero the
scale.

2. Press the TARE key.

The weight display will go to “0”, and
the TARE ENTERED indicator will be
turned off (tare cleared).

Or:

1. Press the KEYBOARD TARE key.

The weight display will blink (display is
any tare weight previously entered).

2. Press the 0 key and press

the ENTER key.

3. The tare weight is cleared and the

TARE ENTERED indicator will be
turned off.

888.8.

-554

COUNT

WEIGHT UNIT WEIGHT

-0.615

1.10000

STABLE

TARE

ENTERED

ZERO

888.8.8.81

COUNT

WEIGHT UNIT WEIGHT

888

0.000

1.10000

TARE

888.8

-554

COUNT

WEIGHT UNIT WEIGHT

888

0.615

1.10000

KEY-

BOARD

TARE

888.8

-554

COUNT

WEIGHT UNIT WEIGHT

8880.61

1.10000

Enter tare weight ‘0’.

888.8.8.81

COUNT

WEIGHT UNIT WEIGHT

888

0.000

1.10000

ENTER

Summary of Contents for HC-15Ki





























































Search results

Summary of Contents for HC-15Ki

Reviews:

Brands by name

Popular brands

A&D HC-15Ki, Instruction Manual

Search results

Summary of Contents for HC-15Ki

Reviews:

Brands by name

Popular brands