GX-A Series/GF-A Series Communication Manual 15 / 41
Key mode B mode Internal setting
Regardless of the presence or absence of the stable value mark, when the PRINT key is pressed, the
weighing value will be output once.
At that time the displayed weighing value will blink once to indicate that it had been output.
Key mode C mode
Internal setting
When the PRINT key is pressed and the stable value mark is displayed, the weighing value will be
output once. In case the stable value mark is not displayed, the weighing value will be output once
the stable value mark is displayed next time.
At that time the displayed weighing value will blink once to indicate that it had been output.
Interval
mode
Internal
setting
Regardless of the presence or absence of the stable value mark, values will be output at an interval
of the internal setting (interval time). By pressing the PRINT key data output is started and
stopped by pressing it again during the data output.
Related internal settings
Interval
time
Baud rate
Caution
□
Depending on the interval time and the baud rate, all data may not be transmitted unless the
baud rate is increased.
