-20-
Q: Up to what size of sample can be measured?
A: Considering the density pan size, the maximum size of the sample that can be
measured is as follows:
Diameter 25
mm
Height
30
mm
Mass
100
g
Q: Can I measure the density of a liquid with a high viscosity?
A: A liquid with a viscosity up to 500 mPa
⋅
s can be measured. If the viscosity exceeds
this value, the float takes excessive time to sink and a measurement error occurs.
Measuring adhesives is not recommended because the adhesive sample may be
difficult to remove from the float.
Q: When a semi-micro balance is used, is accuracy improved?
A: Surface tension affects the measurement value in the range approximately
between 0.2 mg and 1.0 mg. In a measurement using the 0.1 mg range, the
magnitude of an error and the level of balance accuracy are almost the same.
In a measurement using the 0.01 mg range, the magnitude of an error greatly
exceeds the level of balance accuracy. So, using a semi-micro balance is not
recommended.
Summary of Contents for GX-13
Page 5: ...3 1 The Kit Includes...