A&D FX-1200GD, Instruction Manual

Page: 70 / 80

68
19. SPECIFICATIONS
FZ-300CT FZ-600CT
310 ct 610 ct Weighing capacity
62 g 122 g
310.420 ct 610.420 ct Maximum display
62.084 g 122.084 g
0.001 ct Minimum weighing value (1 digit)
0.001 g
Repeatability (Standard deviation) 0.001 ct / 0.0005 g
Linearity
±
0.002 ct /
±
0.001 g
Stabilization time (typical at FAST) Approx. 2.2 seconds
Sensitivity drift
(10°C-30°C/50
°
F-86
°
F )
±2 ppm/°C
Accuracy right after calibration using
the internal mass. See notes below *
±
0.010 ct /
±
0.002 g
Internal mass
Available
Clock function
Available
Operating environment
5°C to 40°C (41°F to 104°F)
85%RH or less (No condensation)
Display refresh rate 5 times/second or 10 times/second
Minimum unit mass 0.001 g Counting
mode *1
Number of samples 5, 10, 25, 50 or 100 pieces
Minimum 100% reference mass
0.100 g Percent
mode *1
Minimum 100% display 0.01%, 0.1%, 1% (Depends on the reference mass stored.)
External calibration weight
50 g
20 g
100 g
50 g
Weighing pan diameter 90 mm
Net weight Approx. 3.8 kg
External dimensions 198 (W) x 294 (D) x 315 (H) mm
AC adapter
Confirm that the adapter type is correct for the local voltage and power
receptacle type
Power consumption Approx. 11VA (supplied to the AC adapter)
Interface RS-232C
*1 To use the counting mode or the percent mode, storing each mode as described in “9-9
Storing Units” is required.
* - Accuracy right after calibration using the accessory small breeze break and the internal mass,
in good ambient conditions (within the temperature range of 10
°
C to 30
°
C (50
°
F to 86
°
F) with
no abrupt changes in temperature or humidity, no drafts, no vibration and no effect by magnetic
fields or static electricity).
- With the FZ-CT series balance, the environment and passing age may cause internal mass
value error. Calibrate using an external mass and perform maintenance.