background image

5-4.

 

Unit Weight, Tare, Comparator Limits & Total Count 
Stored 

 

The scale is initially set to store the ID numbers with a unit weight and an item code 
only. However, it can be set to store a tare weight, comparator limits and/or total count 
also by setting F-Function 

f-01-05

 
1. First register a unit weight and a tare weight by 

any method. If necessary, set the comparator 
limits and use the M+ accumulation. 

 
 
2. Go to step 2 of section “

5-1. Store Unit 

Weight By ID Numbers

”. 

 

When you recall a unit weight by the 

 

ID

 

 key, the tare, comparator limits and/or 

total count are also recalled along with the unit weight. 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 

 

 

 

   

   

   

.

888-51

0

881

pcs

2 A

W E I G H T   ( k g )  

1234561789

0.000

4678

id-123456

2 3 S A M A U

U W   ( g )

1

A B C D E F G H I J K L

12345617

111.000

 

id-00000

”, the special memory area, does not store a tare 

weight, comparator limits and total count along with unit weight. 

 25 

Summary of Contents for FC-1000i























































































Reviews: