BM series
51
Store new date
Store new time
The current
time
New time
The current
date
New date
Press and hold
Press several times
10.7.
Clock And Calendar Function
The balance is equipped with a clock and calendar function. When the
"GLP output (
info
)" and "Time/Date output (
5-td
)" is used, the time and
date can be added to the output data. The operation is as follows:
Operation
1 Press and hold the
RANGE
key until
ba5fnc
of the function
table is displayed in the weighing mode, then release the key.
2 Press
the
RANGE
key several times to display
Cl
adj
.
3 Press
the
key to enter the mode for the time and date.
Checking the current time
4 The current time is displayed with all the digits blinking.
When changing the time, press the
RE-ZERO
key and proceed to step 5.
When the time is correct, press the
RANGE
key and proceed to step 6.
When exiting the mode, press the
CAL
key and proceed to step 8.
Storing a new time
5 Set the time in 24-hour format using the following keys.
RE-ZERO
(
+
)key.To increase the value by one.
MODE
(
-
)key .....To decrease the value by one.
RANGE
key......To select the digits to change the value.
key........To store the new time, and proceed to step 6.
CAL
key...........To cancel operation and proceed to step 6.
Checking the current date
6 The current date is displayed with all the digits blinking.
To change the display order of year (
y
), month (
m
) and day (
d
),
press the
MODE
key. The date is output in the order as specified.
When the date is correct, press the
CAL
key and proceed to step 8.
When changing the time again, press the
RANGE
key and
proceed back to step 4.
When changing the date, press the
RE-ZERO
key and proceed to step 7.
Storing a new date
7 Set the date using the following keys.
RE-ZERO
(
+
)key To increase the value by one.
MODE
(
-
)key.....To decrease the value by one.
RANGE
key .....To select the digits to change the value.
key.......To store the new setting, proceed to step 8.
CAL
key ..........To cancel the new setting and proceed to step 8.
Quitting the operation
8 The balance displays the next menu item of the function table.
Press the
CAL
key to exit the mode and return to the weighing mode.
Note
Do not enter invalid values such as a non-existing time and date in this function.
When the clock backup battery has been depleted, the balance displays
rtc
pf
.
Under this condition, press any key and set the time and date. The dead battery
only affects the clock and calendar function. Even so, the function works normally
as long as the AC adapter is connected to the balance.
Summary of Contents for BM-20
