ADF-4000 Installation and Operation Guide
Date : MAR. 30th, 2015
- 17 -
5. MAINTENANCE
A small amount of dust or dirt on 3D-filter(polarized panel) has minimal effect
on image quality. Clean 3D-filter only when dust, dirt, oil or other marks are
obvious. When doing so, clean the glass according to the instructions in the
following sections : Never touch the optical surfaces with bare hands.
3D-filter is specially treated with an optical, anti-reflective coating.
Always use a high-intensity flashlight to check 3D-filter for particles.
5-1 CLEANING DUST
Tools
- Canned air, Flashlight
Procedure
Use canned air to blow dust off 3D-filter.
Use high intensity flashlight to check for smudges.
5-2 FINGERPRINTS AND SMUDGES
Tools
- Micro-fiber cloth, Flashlight
Procedure
Remove fingerprints or smudges from 3D-filter by rubbing firmly with
micro-fiber cloth using linear or circular motions.
Use high intensity flashlight to check for residue.
5-3 RESISTANT RESIDUE
Tools
- Micro-fiber cloth, anti-reflective glass lens cleaning solution, Flashlight
Procedure
Apply anti-reflection glass lens cleaning solution to micro-fiber cloth.
Use high intensity flashlight to check for streaking.
Use dry portion of micro-fiber cloth to remove streaking by rubbing
gently in a circular motion.
5-4 IF YOUR ADF-4000 SYSTEM DOES NOT WORK PROPERLY
Please don’t disassemble and repair ADF-4000 system.
If operating errors occur abnormally, we will replace your product as the
same new product.