Operators and Maintenance Manual
Measuring module
EMS DAQ R02.01
Page
13/18
Copyright:
Auto & Aero Technologies Sp. z o.o.
Mazowiecka 10/5, 20-723 Lublin, Poland
■
email: [email protected]
■
www.aatech.pl
to 20
to 40
to 60
7
Oil temperature (
°C
)
(if rotor speed >
200 rpm)
poniżej 0
from 0
to 20
from 20
to 40
from 40
to 60
8
Cylinder head
temperature
–
sensor 1 (
°C
)
from 100
to 110
from 110
to 120
from 120
to 130
above
130
9
Cylinder head
temperature
–
sensor 1 (°C)
from 100
to 110
from 110
to 120
from 120
to 130
above
130
10
Cylinder head
temperature
–
sensor 2 (°C)
from 850
to 875
from 875
to 900
from 900
to 925
above
925
11
Cylinder head
temperature
–
sensor 2 (°C)
from 850
to 875
from 875
to 900
from 900
to 925
above
925
12
Linear acceleration
(g)
1
from 2
to 4
from 4
to 8
from 8
to 12
above
12
1
if connected to AUX AVS 01
4.3. Additional functionalities
Connecting the module to AUX AVS 01 communication module enables the
system to analyse linear acceleration and to adjust brightness of EEM MOT
01
FE…
monitor displays (digital data about brightness level send form AUX
AVS 01 to each monitors).
4.4. Readout of module records
To access records of engine and aircraft operating parameters, the EMS
DAQ R02.01 Module needs to be connected to data bus RS2 (Figure 3) by
means of RS485->USB converter. A software enabling data transmission
can be downloaded from www.aatech.pl.
