A&A Manufacturing QuikDekClor Installation Instructions & User Manual Download Page 9

© Copyright 2020 A&A Manufacturing. All rights reserved.

Page 9

Rev. 20200108

Limited Warranty

To original purchasers of this equipment, A&A Manufacturing will 

warrant the QuikDekClor from defects in materials and workmanship 

for a period of one year from the date of purchase.

The limited warranty excludes damage from freezing, negligence, 

improper installation, improper use or care or any Acts of God. Parts 

that fail or become defective during the warranty period shall be 

repaired or replaced, at A&A Manufacturing’s option, within 90 days 

of the receipt of defective product, barring unforeseen delays, without 

charge. Proof of purchase is required for warranty service. In the 

event proof of purchase is not available, the manufacturing date of 

the product will be the sole determination of the purchase date. To 

obtain warranty service, please contact the place of purchase. A&A 

Manufacturing shall not be responsible for cartage, removal, repair or 

installation labor or any other such costs incurred in obtaining warranty 

replacements or repair.

The A&A Manufacturing warranty does not apply to components 

manufactured by others. For such products, the warranty established 

by the respective manufacturer will apply. The express limited 

warranty above constitutes the entire warranty of A&A Manufacturing 

with respect to its pool products and is in lieu of all other warranties 

expressed or implied, including warranties of merchantability or fitness 

for a particular purpose. In no event shall A&A Manufacturing be 

responsible for any consequential, special or incidental damages of any 

nature.

Please retain for your records.

Date of Installation

Summary of Contents for QuikDekClor











Reviews: