© Copyright 2020 A&A Manufacturing. All rights reserved.
Page 6
Rev. 20200108
Plumbing the Balance Line
1. Using 1” PVC the balance line can be
installed by gluing a 2 inch long piece of
pipe into the bottom of the canister and
once that joint has set, dry-fit a 90° elbow
(Figure 5a).
2. From the 90° elbow, glue an 18 inch length
of pipe and cap the end. Configure the
balance line so that it extends into the pool
at a 90° angle to the finished pool wall.
Now glue the dry-fit 90° elbow in place
(Figure 5b).
Dry-fit
18” pipe
Length
90°
Figure 5
b
a
18.00”
(457mm)
Summary of Contents for QuikDekClor
Page 2: ...Blank Page...
