background image

 PLEASE READ THIS MANUAL COMPLETELY

 B

EFORE

 

 

OPERATINGEQUIPMENT

 

INTRODUCTION

    

For years nothing has equaled the appearance and quality of foil imprinting. Printing with ink does not offer the 

vibrant color of foil.  In addition, foil imprinting imparts a 3-dimensional effect that is not obtainable with 
conventional ink printing.  Foils are uniformly opaque, odorless, non-liquid and are smear free.

    

The foil imprinting process transfers the color of the foil to an item by the application of heat and pressure.  The 

three basic elements needed to create a quality foil imprint are the proper amount of heat, pressure and dwell (the 
length of time the type and dies are in contact with the product.)

    

AAmstamp's personalizing machines are designed to give you the power of a big press in a table top machine.  

The 

2000 Series Machine and it’s accessories, type, dies, emblems and foils are the highest quality and easiest to 

use products available today.  After reviewing this manual, please call our customer service department toll free 
(888) 375-8375 with any questions you may have.

SAFETY PRECAUTIONS -  PLEASE READ CAREFULLY

    

AAmstamp's printing machine is an electric tool and as such, basic safety precautions should be followed. 

Taking these precautions will reduce the risk of fire, electric shock, or personal injury.

1

Keep your area clean and clutter free.

2

Dress properly.  Do not wear loose clothing or jewelry which could become entangled in the machine.

3

Do not use the machine in a damp or wet place, or expose it to rain.  Do not use the machine in the presence of

flammable liquids or gases.

4

Do not touch the Typehead/Ram Bar assembly.  These parts of the machine have operating temperatures that 

can

seriously burn on contact.

5

Guard against electrical shock by inspecting all the electrical cords regularly and replace any worn or damaged

cords

.

6

Always use the safety guard when using an air operated machine.  Before using the machine, ensure that the 

guard is in place and functioning properly

.

7

Note the voltage on the power source.  AAmstamp equipment runs on standard 115V A/C.  The M-2000 

Machine draws 5.5 amperes while the Air-2000 draws 7.0 amperes

.

8

AAmstamp equipment should not be used while under the influence of alcohol and/or drugs

.

9

WARNING !!  The Air and Titan Machines are air operated and caution should be exercised when working

around the imprinting area to avoid serious

 

injury.

2

Summary of Contents for M-2000


























Reviews: