8
Version 1.0.2
4.
Press
F1 STOP
to temporarily stop transmitting but remain in the Transmit mode. Pressing
F1
START
from the stop screen will resume transmitting.
5.
Press
CLR
to stop transmitting and return to the main screen.
7.4
O
UTPUT
E
RRORS
This sections describe the transmitter operation when the clips have excessively high or low resistances
connected to the pair clips.
7.4.1
Low Current
–
High Resistance or Open
Low current occurs when the resistive fault is too high or the clips are connected to an Open. Check the
clip connections when the ST-101 indicates
Hi Resistance Error
. In some cases, a higher frequency may be
used and increase the current.
The following table shows the typical fault resistances that can be located.
Summary of Contents for ST-101
Page 1: ...ST 101 Signal Transmitter Fault Location Transmitter User Manual Version 1 0 2...
Page 4: ......
Page 14: ......
Page 16: ......
