8 2
SBC-558P User Manual
Windows® NT 4.0
Driver installation
1. Install Windows
NT 4.0 as you normally would for a
VGA
display. Click the
Star
buttom, go to
Settings
and click on
Control
Panel
icon. Then choose the
Display
and double click on the icon.
In the
Display Properties
window, click the
Setting
buttom, then
click the
Display Type
buttom into the
Display Type
windows, then
click on
Change
buttom from the
Adapter Type
icon. And click on
Have Disk
buttom in the change display window.
2. Place the
Supporting CD-ROM
into your CD-ROM dirve. In the
Select Device
window, click on
Have Disk
, select "
Browse
" and
find the NT 4.0 driver from:
cd-rom : \CD ROM\model name\dirver\vga driver\
win98 nt\windows.nt\nt40\Oemsetup.inf
"
cd-rom
" : the drive letter of your CD-ROM drive
"
model name
" : the model number of your product
and then click OK. The name of the
Chips and Technologies, Inc
.
Video Controller
driver will appear highlighted in the Modules list
box. Select Chips and Tech. 69000 and Click
OK
. Click
OK
to start
the driver installation.
3. Once the installation is complete, the
Change Display Type
window
will reappear. Click on close to close the window. Then the
Display Properties
window will reappear. Click on
Apply
. Restart
the system for the new settings to take effect.
Summary of Contents for SBC-558P
