Aaeon SBC-558P, Manual

Page: 28 / 100

SBC-558P Installation Guide 19
VGA Display connector (CN6)
The SBC-558P PCI SVGA interface can drive conventional CRT
displays and is capable of driving a wide range of flat panel
displays, including electroluminescent (EL), gas plasma, passive
LCD, and active LCD displays. The board has two connectors to
support these displays, one for standard CRT VGA monitors and
one for flat panel displays.
VGA display connector (CN6)
A simple one-to-one adapter can be used to match CN6 to a
standard 15-pin D-SUB connector commonly used for VGA.
Pin Signal Pin Signal
1 Red video 9 Key (on pin)
2 Green video 10 Sync return (GND)
3 Blue video 11 Monitor ID (notused)
4 Not used 12 Monitor ID
5 GND 13 Horizontal Sync
6 Red returned(GND) 14 Vertical Sync
7 Green returned(GND) 15 Not used
8 Blue returned (GND)