![background image](http://html1.mh-extra.com/html/aaeon/sbc-410/sbc-410_manual_3350772040.webp)
32 SBC-410 User's Manual
Reset switch (CN1)
You can connect an external switch to easily reset your comput-
er. This switch restarts your computer as if you had turned off
the power then turned it back on. The following table shows the
pin assignments for the CN1.
Reset switch (CN1)
Pin
Function
1
Ground
2
Reset
Turbo LED (CN2)
You can connect a LED indicator across CN2 to indicate when
the CPU is in Turbo mode. Marks on the circuit board indicate
LED polarity (the pin on the left is positive).
Turbo LED (CN2)
Pin
Function
1
Turbo
2
Ground
Turbo switch (CN8)
You can connect a switch across the pins of CN8 to change the
CPU speed between Turbo and non-Turbo mode. When you
leave the pins open, the CPU card operates at full speed. When
you close the pins, the card operates at slow speed for compati-
bility with older software.
Turbo switch (CN8)
Pin
Function
Low speed
High Speed
1
- Deturbo
2
Pull low
*default
*
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com