manualshive.com logo in svg

Aaeon PCM-5335, Manual

Share
Download
Aaeon PCM-5335 Manual Download Page 72

6 2

PCM-5335  User's Manual

B.1 Installing PC/104 modules

The PCM-

5

335's PC/104 connectors give you the flexibility to attach

PC/104 modules.

Installing these modules on the PCM-

5

335 is quick and simple. The

following steps show how to mount the PC/104 modules:

1. Remove the PCM-

5

335 from your system paying particular atten-

tion to the safety instructions already mentioned above.

2. Make any jumper or link changes required to the CPU card now.

Once the PC/104 module is mounted you may have difficulty in
accessing these.

3. Normal PC/104 modules have male connectors and mount directly

onto the main card.  (Refer to the diagram on the following page.)

4. Mount the PC/104 module onto the CPU card by pressing the

module firmly but carefully onto the mounting connectors.

5. Secure the PC/104 module onto the CPU card using the four

mounting spacers and screws.

Summary of Contents for PCM-5335































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands