Aaeon EMB-Q170B, Manual

Page: 38 / 50

3-4
EMB-Q170B
Device Select [Auto]
Allows you to schedule an operation for security devices. Reboot your system for
the changes to take effect. Configuration options: [Auto] [TPM 1.2] [TPM 2.0]
[Auto]
Select this item to support both TPM 1.2 and TPM 2.0 devices
with default support of TPM 2.0 devices. If TPM 2.0 devices
are not found, TPM 1.2 devices will be enumerated.
[TPM 1.2] Select this item to support TPM 1.2 devices only.
[TPM 2.0] Select this item to support TPM 2.0 devices only.
3.3.3 SATA Configuration
SATA Controller(s) [Enabled]
Allows you to enable or disable SATA devices. Configuration options: [Enabled]
[Disabled]
SATA Mode Selection [AHCI]
Allows you to set the SATA configuration.
[AHCI] Set to [AHCI] when you want the SATA hard disk drives to use
AHCI (Advanced Host Controller Interface). AHCI allows the
onboard storage driver to enable advanced Serial ATA features
that increases storage performance on random workloads by
allowing the drive to internally optimize the order of commands.
[RAID] Set to [RAID] when you want to create a RAID configuration from the SATA
hard disk drives.
Serial-ATA Port 0~3
Allows you to enable or disable Serial-ATA Ports.
Port 0/1/2/3 [Enabled]
Configuration options: [Enabled] [Disabled]
Hot Plug [Disabled]
Configuration options: [Enabled] [Disabled]
M.2 SATA Port
Allows you to enable or disable Serial-ATA Ports.
M.2 Port [Enabled]
Configuration options: [Enabled] [Disabled]
Hot Plug [Disabled]
Configuration options: [Enabled] [Disabled]