![background image](http://html1.mh-extra.com/html/aaeon/emb-q170b/emb-q170b_manual_3242680024.webp)
EMB-Q170B
2-16
6. Chassis intrusion header (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch.
Connect one end of the chassis intrusion sensor or switch cable to this
connector. The chassis intrusion sensor or switch sends a high-level signal to
this connector when a chassis component is removed or replaced. The signal
is then generated as a chassis intrusion event.
By default, the pin labeled “Chassis Signal” and “Ground” are shorted with
a jumper cap. Remove the jumper caps only when you intend to use the
chassis intrusion detection feature.
EMB-Q170B
EMB-Q170B Chassis intrusion connector
Intrudor
Intrudor
No Intrudor
PIN1
CHASSIS
7. Intel
®
ME Jumper (3-pin DIS_ME)
This jumper allows you to force the Intel
®
Management Engine (ME) to boot
to recovery mode when ME becomes corrupted.
EMB-Q170B
EMB-Q170B Intel
®
ME jumper
2
1
2 3
DIS_ME
ME Enable
(Default)
ME Disable
Summary of Contents for EMB-Q170B
