3-11
Chapter 3: BIOS setup
To clear the user password, follow the same steps as in changing a user assword,
but press <Enter> when prompted to create/confirm the password. After you clear
the password, the
User Password
item on top of the screen shows
Not Installed
.
3.6
Boot menu
The Boot menu items allow you to change the system boot options.
3.6.1
Boot Configuration
Quiet Boot [Enabled]
This item enables/disables Quiet Boot. Configuration options: [Disabled] [Enabled]
Network Stack [Enabled]
This item allows user to disable or enable the UEFI network stack. Configuration
options: [Disabled] [Enabled]
3.6.2
Boot Option Priorities
These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number of
devices installed in the system.
• To select the boot device during system startup, press <F7> during POST.
• To access Windows OS in Safe Mode, press <F8> after POST.
3.7
Save & Exit menu
Save Changes and Reset
Once you are finished making your selections, choose this option from the Exit
menu to ensure the values you selected are saved. When you select this option, a
confirmation window appears. Select Yes to save changes and reboot system.
Discard Changes and Exit
This option allows you to exit the Setup program without saving your changes.
When you select this option or if you press <Esc>, a confirmation window appears.
Select Yes to discard changes and reboot system.
Restore Defaults
Save or restore User Defaults to all setup options.
