I/O
Storage
2 x SATA 6Gb/s (1 colay with M.2) (default: 1 x SATA + M.2)
1 x SATA power connector (5V / 12V @1A)
USB
2 x USB 3.0 ports (at the back panel)
5 x USB 2.0 ports (2 at the back panel, 3 at the mid-board)
Display I/O
1 x VGA, 1 x HDMI, 1 x eDP (colay with LVDS)
Audio I/O
Mic-In, Line-Out
LAN I/O
2 x RJ-45 ports on rear I/O
Serial ports
5 x RS-232
1 x RS-232/422/485 supports 5V/12V/RI option (COM1)
DIO
8-bit Digital I/O interface (4-in / 4-out)
Fan
1 x Chassis fan connector (4-pin)
I/O Placement
Back panel I/O ports
(Low profile)
1 x 12V~24V wide-range voltage input DC jack (5.5/2.5mm)
2 x USB 3.0 ports
2 x USB 2.0 ports
1 x HDMI port (vertical type)
1 x VGA port
2 x LAN (RJ-45) ports
1 x Audio jack (Line-Out), green
1 x Audio jack (Mic-in), pink
Internal I/O
connectors
1 x M.2 M key (22 x 42mm) for SATA
1 x M.2 E key (22 x 30mm) for PCIe
1 x P/S2 header
2 x SATA 6.0 Gb/s connectors (1 colay with M.2)
1 x SATA power connector
1 x USB 2.0 header supports additional 2 USB ports (2 x 5PIN, p=2.00mm)
1 x USB 2.0 header supports additional 1 USB port (2 x 5PIN, p=2.00mm)
1 x Chassis fan connector
1 x Chassis intrusion jumper
5 x boxer headers for COM (RS-232)
1 x boxer header for COM (RS-232 / 422 / 485)
1 x Digital I/O connector (4-in / 4-out)
1 x 40-pin LVDS / eDP connector (colay; default eDP) (LVDS via PS8625)
1 x LVDS 3V / 5V selection jumper
1 x LCD DC / PWM mode selection jumper
1 x LCD backlight connector (inverter)
1 x LCD backlight 12V / 5V jumper
1 x Battery horizontal socket
1 x 2*2 PIN DCIN AUX power connector
1 x System panel connector
1 x AT/ATX mode selection jumper
1 x CMOS jumper
1 x PCIe 2.0 [x1] slot
(continued on the next page)
1-3
Chapter 1: General information
