![background image](http://html1.mh-extra.com/html/aaeon/emb-apl1-a10-3350-f1-lv/emb-apl1-a10-3350-f1-lv_manual_3225635022.webp)
5. Serial ATA 6.0Gb/s connector (7-pin SATA6G_1~2)
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial
ATA 6.0 Gb/s signal cables.
6. USB 2.0 connectors (10-pin USB2_P1, USB2_P2)
These connectors are for USB 2.0 ports. Connect the USB module cable
to any of these connectors, then install the module to a slot opening at the
back of the system chassis. These USB connectors comply with USB 2.0
specification that supports up to 480 Mbps connection speed.
CAUTION!
Never connect a 1394 cable to the USB connectors. Doing so will
damage the motherboard!
NOTE:
The USB module cable is purchased separately.
EMB-APL1
EMB-APL1 SATA 6.0Gb/s connectors
SATA6G_1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXN1
RSATA_RXP1
GND
SATA6G_2
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXN2
RSATA_RXP2
GND
EMB-APL1
EMB-APL1 USB2.0 connectors
PIN 1
GND GND USBPP1 5V
+5V
USBPN0 USBPP0
GND GND
USB2_P1
PIN 1
GND GND NC NC +5V
+5V
USBPN0 USBPP0
GND GND
USB2_P2
EMB-APL1
2-14