3-18
ATX-Q370A
To change a user password:
1. Select the
User Password
item and press <Enter>.
2. From the
Enter Current Password
box, key in the current password, then
press <Enter>.
3. From the
Create New Password
box, key in a new password, then press
<Enter>.
4. Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user
password, but press <Enter> when prompted to create/confirm the password. After
you clear the password, the
User Password
item on top of the screen shows
Not
Installed
.
3.6
Boot menu
The Boot menu items allow you to change the system boot options.
3.6.1
Boot Configuration
Quiet Boot [Enabled]
This item enables/disables Quiet Boot. Configuration options: [Disabled] [Enabled]
Launch PXE ROM [Do not launch]
This item controls the execution of UEFI and Legacy. Configuration options: [Do
not Launch] [UEFI] [Legacy]
3.6.2
FIXED BOOT ORDER Priorities
Boot Option #1~#16
This item allows you to set the system boot order. Configuration options: [UEFI
USB Key] [UEFI Hard Disk] [UEFI USB Hard Disk] [UEFI Network] [UEFI USB Lan]
[UEFI CD/DVD] [UEFI USB CD/DVD] [UEFI USB Floppy][ USB Key] [Hard Disk]
[USB Hard Disk] [Network] [USB Lan] [CD/DVD] [USB CD/DVD] [USB Floppy][
Disabled]
3.6.3
UEFI NETWORK Drive BBS Priorities
This item specifies the boot device priority sequence from the available UEFI
network drives.
