ATX-Q370A
2-18
2.7.2
Internal connectors
IMPORTANT:
• For a fully configured system, we recommend that you use a power supply
unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version)
and provides a minimum power of 330W.
• We recommend that you use a PSU with higher power output when
configuring a system with more power-consuming devices. The system
may become unstable or may not boot up if the power is inadequate.
1.
ATX power connectors (24-pin EATX_PWR1, 8-pin EATX_PWR2)
These connectors are for ATX power supply plugs. The power supply plugs
are designed to fit these connectors in only one orientation. Find the proper
orientation and push down firmly until the connectors completely fit.
ATX-Q370A
ATX-Q370A ATX power connectors
PIN 1
PIN 1
GND
+5 Volts
+5 Volts
+5 Volts
-5 Volts
GND
GND
GND
PSON#
GND
-12 Volts
+3 Volts
+3 Volts
+12 Volts
+12 Volts
+5V Standby
Power OK
GND
+5 Volts
GND
+5 Volts
GND
+3 Volts
+3 Volts
+12V DC +12V DC +12V DC +12V DC
GND GND GND GND
A
B
B
A
EATX_PWR1
EATX_PWR2
ATX-Q370A
ATX-Q370A BIOS Programmable connector
PIN 1
SPI_1
GND
SPI_CLK
SPI_MOSI
(NC)
+3V_SPI
SPI_CS#
SPI_MISO
(NC)
2.
BIOS programmable connector (8-pin SPI_1)
Use this connector to flash the BIOS ROM.
