ATX-Q370A
2-16
2.7 Connectors
2.7.1
Rear panel connectors
6
5
9
7
8
4
1
2
10
3
1.
USB 2.0 ports.
These two 4-pin Universal Serial Bus (USB) ports are
available for connecting USB 2.0/1.1 devices.
NOTE:
Before you install Windows 7 operating system, go to BIOS Setup >
Advanced > XHCI mode [Disabled], USB 2.0 (EHCI) support [Enabled], and set
them back when you finish installing the operating system.
2. DisplayPort
. This port is for a DisplayPort-compatible devices.
3.
Video Graphics Adapter (VGA) port.
This 15-pin port is for a VGA monitor
or other VGA-compatible devices.
NOTE:
Disable LVDS support when using only the VGA port. Refer to the
section on System Agent (SA) Configuration in Chapter 3 for details.
4.
LAN1~2 (RJ-45) ports.
These ports allow Gigabit connection to a Local Area
Network (LAN) through a network hub. Refer to the table below for the LAN
port LED indications.
LAN port
Speed LED
Activity Link
LED
ACT/LINK LED
SPEED LED
Status
Description Status
Description
OFF
No link
OFF
10 Mbps connection
ORANGE
Linked
ORANGE
100 Mbps connection
BLINKING Data activity GREEN
1 Gbps connection
LAN port LED indications
5.
Line In port (light blue).
This port connects to the tape, CD, DVD player, or
other audio sources.
6.
Line Out port (lime).
This port connects to a headphone or a speaker.
7.
Microphone port (pink).
This port connects to a microphone.
