AAdynTech Punch Series Light, User Manual

Page: 3 / 19

3
Before You Begin
What is Included
•
User’s Manual
•
One (1) Punch Plus light
•
AC Power Input cable with plug
o
USA voltage (120Vac), three-prong plug standard
o
1- 120/240V Adapter
•
Diffuser lens, three (3), 15
o
, 30
o
and 55
o
, 1 scrim bag and 1 doughnut frame
•
One (1) Yoke Pin with attaching hardware
•
External User Interface Module UIM ( Sold Separately)
Unpacking Instructions
Immediately upon receipt of this light, carefully inspect the shipping packaging for any obvious signs of
damage from mishandling or exposure to the elements. If any is noted, please provide this information
to the shipper immediately so that the proper claims can be processed. Place packaging in upright
position (with labeling and markings in readable orientation) and open the top end of the carton. Verify
that all material shown above in the “What is included” section is present and in good condition.
Remove the light and associated material from the carton and place the light on a stable surface or
mounting configuration.
Symbol Definitions
Safety Notes
The Punch Series light fixtures are for professional use only. Please Read Entire User Manual Before
Using Equipment.
•
This light is intended for indoor use only. The light is ETL & CE listed with IP20 protection.
•
Only qualified and certified personnel should perform installation, not for household use.
•
Punch Series light should always be installed/mounted in a stable and secure location or mounting.
Note: This symbol indicates important information that should be
carefully considered and followed.
Note: This symbol indicates important safety information and
warnings. Special attention should be paid to reading,
understanding and heeding these warnings. Failure to
observe these warnings could result in damage to the fixture,
third-party equipment or harm to the user.
Note: This symbol indicates important information concerning the
operation or functions of this light.