Maintenance
11
Clean Fan Screen
Clean the fan screen every 2 to 4 weeks as needed. If ozone generator is installed in poor air quality
area with dust, the screen must be cleaned as needed in order for air to pass through the unit and
cool the parts inside the generator.
• Turn the ozone generator off and unplug the unit
• Remove the back fan guard and screen. To do this, pull out the corner
• Clean sponge screen with soap and water
• Rinse
• Dry sponge screen thoroughly with a clean towel
• Reinstall the screen and fan guard
• Plug the unit in and turn the ozone generator on
• Be sure the screen does not touch the fan blade.
Changing Fuse
The outside fuse is located near the back rocker switch. The ozone board fuse is located on the
back left of the board.
See the table below for details:
Unit
Outside Fuse (AMPs)
Ozone Board Fuse (AMPs)
MP-1000
3A
3A
Summary of Contents for MP-1000
Page 6: ...5 1 2 3 4 5 6 7 8 9 MP 1000...
Page 14: ...13 1 2 3...