2
Important Safety Information
Proper installation and usage of your Aquatic 2 Spa Ozone Generator is your responsibility.
Read and follow this owner’s manual carefully for important installation, operation and
safety information. Basic safety precautions should always be followed, including but not
limited to the following:
• Read and follow all instructions.
• All electrical connections should be made by a qualified electrician.
• Follow all applicable electrical codes.
• Be sure the electrical power is shut OFF at the main circuit breaker before installing the
ozone generator.
• If the ozone generator electrical connection is to be attached to spa controls, be sure the
spa controls are protected by a Ground Fault Circuit Interrupter (GFCI). If the Aquatic 2
is connected to an independent electrical supply a GFCI must be installed between the
ozone generator and the electrical supply.
• Do not bury the cord.
WARNING
– To reduce the risk of electrical shock, replace damaged cord immediately.
• Per UL spa requirements, the Aquatic 2 must be mounted indoors or under a cover
sheltered from the elements (rain, sun, sprinklers).
• Mount the Aquatic 2 so that it is inaccessible to anyone in the spa. Never attempt
servicing when wet.
• To reduce the risk of injury, the unit should be mounted where it is inaccessible to
children.
• Plastic ozone supply tubing is available with the Aquatic 2. Never replace this tubing with
metal tubing.
• Do not operate the Aquatic 2 unless sufficient air flow is being drawn through the unit.
WARNING
– Short term inhalation of high concentrations of ozone and long-term
inhalations of low concentrations of ozone can cause harmful physiological effects. Do not
inhale ozone gas produced by the device.
PLEASE SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
In Accordance With California Regulations -- This Ozone Generator is Solely for Industrial
Use and Must Be Installed by a Professional. Potential Health Hazard: Emits Ozone.
