Jolly PRO – Operating Manual
38
9.1 How to upgrade Bootloader
The Bootloader’s upgrade operation will always involve the
removal of any information regarding the machine firmware. At the
end of the installation process will always be necessary to proceed
with restoring the firmware version previously installed on Jolly
PRO, as described later in this section.
To fully upgrade the machine’s Bootloader, you must perform the steps described in
the following 16 easy steps.
a)
Remove the SD card from the SD card slot (if you don’t have the card provide with
the machine, you can request a new one contactinafter-sales
service), and then
insert it into your PC.
b)
Only if you are using the SD Card onboard the machine, please before copying the
Bootloader’s upgrade file, you must save all your data in any folder on your PC.
c)
Format the SD card only in "FAT" mode. Other modes are not valid.
d)
Copy the 2 files you can find in the Bootloader upgrade file (without rename files
and without creating any folders inside) into the SD Card.
e)
Turn OFF the change machine Jolly PRO and make sure that the main switch of
the unit is in the OFF position.
f)
When the change machine is turning OFF, insert the SD card containing the
Bootloader upgrades inside the machine CPU’s slot. Always observe the
orientation of the card (the side with manufacturer's label facing up) and make sure
to have it properly pushed towards bottom.
g)
Turn ON the machine.
h)
When the machine is turning ON, it will display a screen similar to the one shown in
the first Figure below. On this screen, you can always check the Bootloader
version (first line under the heading "Upgrader Ver 06:00:00") installed on board the
change machine.
i)
Press the external blue button within 5
seconds to start upgrading.
j)
The upgrade will start and a screen,
very similar to the one shown in Figure
here on the right, will be displayed. In
this way you can always check the
percentage of completion of the
upgrade (indicated by a progressive
counter).
Summary of Contents for Jolly PRO
