manualshive.com logo in svg

A.u.S Jolly PRO, Operating Manual, Page: 36 / 60

Share
Download
A.u.S Jolly PRO Operating Manual Download Page 36

Jolly PRO – Operating Manual 

 

36 

 

8.5 Information on using the SD Card 

A. Introduction 

An SD Card is a compact storage unit with variable storage capacity. All coin change 
machines  of  the  new  Pro  series  are  equipped  with  an  electronic  board  with  a  slot, 
where  a  SD  Card  supplied  with  the  machine  is  already  inserted.  A  series  of  files 
working only on Pro  series coin change machines of the same  model can be stored 
on the memory of the SD Card, following the procedures explained above. 

B. Extracting and inserting the SD Card 

The  SD  Card  supplied  is  already  inserted  in  the  appropriate  slot  of  the  electronic 
board of the coin change machine. 
To extract the SD Card from the slot, press it on the free side: a spring loaded system 
will release the card that can then be extracted. 
When re-inserting the SD Card into the slot, press it until it clicks. 

C. Viewing data contained in a SD Card on a Personal Computer 

All various data contained in a SD Card can be viewed on a PC with Microsoft Excel. 
The PC must be equipped with a standard SD Card reader, where the card must be 
inserted. If the PC does not have an inbuilt reader, various SD Card universal readers 
are  available  on  the  market,  to  be  connected  to  the  PC  via  USB  cable.  (Contact  a 
local dealer for further information). 
After  inserting  the  SD  Card  into  the  reader  and  after  the  PC  recognizes  it  correctly, 
access  “My  Computer”  and  select  the  SD  Card,  usually  recognized  as  a  “Mass 
storage device”; by clicking on it the PC will automatically recognize the file contained 
in the SD Card and will start a program suitable to view its contents. For example, if 
accounting  data  or  the  history  log  have  been  saved  on  the  SD  Card  (see  the 
“exporting  accounting  data”  section  in  this  manual),  the  data  will  be  viewed  with 
Microsoft Excel. 

D. Importing firmware updates from a PC to the coin change machine   

In  order  to  import  a  firmware  update  onto  the  coin  change  machine  (firmware 
upgrade), the update must be copied onto the SD Card using a PC; for further detail 
on how to read and write data onto a SD card, see the previous paragraph. Once the 
update has been loaded onto the SD Card, you only need to insert it into the slot of 
the coin change machine; when turned on, a special sound will warn that the upgrade 
has been concluded. 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for Jolly PRO





























































Reviews:

No comments