Page 28 09/2021
Installation and Operating Instructions
UPS Edition One 1kVA, 2kVA, 3kVA
6. Options
SNMP-Card:
The SNMP card integrates the UPS into a network. After assigning its own IP address,
the UPS can be accessed from any location, which is particularly interesting for remote
administration/maintenance of the system.
It can easily be inserted into the SNMP slot (INTELLIGENT SLOT) of the UPS and only
needs to be connected with a network cable.
■
Loosen the two screws (on each side of the card).
■
Carefully insert the SNMP card and secure the screws.
Relaycard:
The internal mini relay card is used as an interface for UPS peripheral monitoring.
The contact signals reflect the operating status of the UPS. The card is connected to
peripheral monitoring devices via the terminal block to effectively monitor the real-time
status of the UPS and provide timely status feedback when an abnormal situation occurs
(e.g. UPS failure, mains interruption, UPS bypass, etc.). It is installed in the intelligent slot
of the UPS.
The relay board has 6 output ports and one input port.
Please refer to the following table for details.
