6220M Mainboard Chapter 3 Award BIOS Setup
31
Throttle Duty Cycle
When the system enters Doze mode, the CPU clock runs only
partial cycle. You may select the percentage of cycle that the clock runs.
VGA Active Monitor
When Enabled, any video active restarts the global timer for
standby mode.
Soft-Off by PWR-BTTN
Instant-off :
When push the power button, the system
power will be off immediately.
Delay 4 sec :
when push the power button, it will enter
suspend mode. We need to push the power button and hold it for 4 seconds to turn off
the power.
CPUFAN Off In Suspend
Enabled: under suspend mode, the CPU FAN will be
turned off. Disabled: the CPU FAN won’t be turned off.
Resume by Ring
Enabled: when system is in suspend mode, it can be waked up by
modem. Disabled: it cannot be waked up by modem.
Resume by Alarm
When Enabled, two additional lines will be added to the
screen :Date (of Month) Alarm; Time (hh:mm:ss) Alarm to let user set the desired
date and time. After power off, the system will automatically power on at the
specified date and time.
Wake Up On LAN
Enabled : If you have installed LDCM administrator software,
and any client side is powered off, you can wake up by LAN through the LDCM
mechanism. Disabled : You cannot wake up by LAN.
IRQ 8 Break Suspend
When enabled, the device which occupies the IRQ8 can
wake up the system.
Reload Global Timer Events
When enabled, an event occurring on each device
listed below restarts the global time for Standby mode. IRQ [3-7, 9-15], NMI;
Primary IDE 0; Primary IDE 1; Secondary IDE0; Secondary IDE1; Floppy Disk;
Serial Port; Parallel Port
