A-Trend 6220M Manual Download Page 26

Chapter 3    Award BIOS Setup 

 

  6220M Mainboard

 

 

26 

Video  BIOS  Cacheable

    Selecting  Enabled  allows  the  caching  of  the  video  BIOS 

ROM  at  F0000h-FFFFFh,  resulting  in  better  system  performance.  However,  if  any 
program writes to this memory area, a system error may result. 
 

Video  RAM  Cacheable

    Selecting  Enabled  allows  the  caching  of  the  video  RAM, 

resulting  in  better  system  performance.  However,  if  any  program  writes  to  this 
memory area, a system error may result.   
 

8 Bit I/O Recovery Time

    The recovery time is the length of time, measured in CPU 

clocks, which the system will be delayed after the completion of an I/O request. This 
delay takes place because the CPU is operating so much faster than the input/output 
bus that the  CPU must be  delayed  to allow  for the  completion  of the  I/O. This item 
allows  you  to  determine  the  recovery  time  allowed  for  8-  bit  I/O.  Choices  are  from 
NA, 1 to 8 CPU clocks.     
 

16  Bit  I/O  Recovery  Time   

This  item  allows  you  to  determine  the  recovery  time 

allowed for 16-bit I/O. Choices are from NA, 1 to 4 CPU clocks. 
 

Memory  Hole  At  15M-16M   

In  order  to  improve  performance,  certain  space  in 

memory  can  be  reserved  for  ISA  cards.  This  memory  must  be  mapped  into  the 
memory below 16MB. 
 

Passive  Release   

When  Enabled,  CPU  to  PCI  bus  accesses  are  allowed  during 

passive release. Otherwise, the arbiter only accepts another PCI master access to local 
DRAM. The choice : Enabled, disabled. 
 

Delayed  Transaction

    This  chipset  has  an  embedded  32-bit  posted  write  buffer  to 

support  deadly  transactions  cycles.  Select  Enabled  to  support  compliance  with  PCI 
specification version 2.1. The choice : Enabled, disabled space 
 

AGP  Aperture  Size  (MB)

    Select  the  size  of  the  AGP  aperture.  The  aperture  is  a 

portion  of  the  PCI  memory  address  range  dedicated  for  graphics  memory  address 
space.  Host  cycle  that  hit  the  aperture  range  are  forwarded  to  the  AGP  without  any 
translation.  See 

www.agpforum.org

  for  AGP  information.  The  choice  4,  8,  16,  32,  64, 

128, 256. 
 

AGP/PCI  MultiDisplay

      This  item  will  activate  the  AGP  in  the  multi-display 

environment.  It  displayed  if  disabled,  and  the  system  has  both  AGP  and  PCI  VGA 
card, the AGP monitor will not display. 

 

Summary of Contents for 6220M









































Reviews: