7
DMA8825 / DMA8813 / DMA8425 / DMA8413
English
ONBOARD CONTROL
DMA8825
,
DMA8813
,
DMA8425
and
DMA8413
include built-in control software. You can get full control over the DMA
matrix amplifier via the control software by plugging in a standard
VGA
display
and a
USB mouse
to the ports shown
below.
DMA8425/DMA8413
REMOTE CONTROL
1. RM-2VR REMOTE LEVEL CONTROL
Please connect Asystems’
RM-2VR
Remote Control to
the
REMOTE LEVEL CONTROL
connectors of the DMA
matrix amplifier. The channels controlled by the VR is
determined by the wiring of the control. Please note, the
ground for channel 2 is internally wired to channel 1� Only
one grounding pin needs to be connected to the DMA.
In the example found to the right, channels one and two
can be remotely controlled using the RM-2VR.
2. RM-4 REMOTE PRESET RECALL CONTROL
With Asystems’
RM-4
Remote Preset Recall connected
to the
PRESET
connector and some configurations within
the control software, 4 presets can be accessed via
pressing a button. See page 15 for more information on
setting presets�
