4
5.
Operation Controls & Functions
FRONT PANEL
q
POWER LED:
The LED will light in blue when the product is connected to power supply, and amber when the product is on standby.
w
IR WINDOW:
IR receiver window, it only receives the IR remote signal from this product.
e
OLED SCREEN:
Display matrix switching status, input / output port, EDID, Baud rate, IP Address, etc.
r
INPUTS / OUTPUTS BUTTONS:
Signal input/output channel selection buttons. You need to press the output button (A~H) firstly and
then press the input button (1~8) to select the corresponding input source for the output port.
t
ALL BUTTON:
Used to select all output channels. Press buttons
“ALL + INPUT m + ENTER”
by sequence to switch input source m
to all the output channels.
y
MENU BUTTON:
Press the
MENU
button and then press the
UP
(INPUT 1) or
DOWN
(INPUT 2) button to check the specific
information of various menu function options.
u
CLEAR BUTTON:
Used to close output. Press buttons
“CLEAR + OUTPUT m + ENTER”
by sequence to close the output of
OUTPUT m
channel.
i
ENTER BUTTON:
Press this button to confirm the operation and save the settings.
REAR PANEL
q
TCP/IP PORT:
TCP/IP control port, connect to PC or router with an RJ45 cable.
w
RS-232 PORT:
Connect to a PC or control system by D-Sub 9-pin cable to transmit RS-232 command.
e
AUDIO OUT (1-16):
Coaxial audio output port, connect to audio output device such as audio amplifier via a coaxial cable.
r
DC 24V:
Connect to 24V power adapter.
t
GND:
Connect the housing to the ground.
y
INPUT PORTS (1-16):
HDMI input ports, connect to HDMI source device such as DVD or set-top box with an HDMI cable.
u
OUTPUT PORTS (1-16):
HDMI output ports, connect to HDMI display device such as TV or monitor with an HDMI cable.
A
NEU
VIDEO