A-Neuvideo ANI-8-4K60-S, Instruction Manual, Page: 18 / 24

16
ASCII CommandS
FUNCTION
COMMAND
STRING
FEEDBACK STRING VARIABLES EXAMPLE
Perform the indicated audio
switching operation
> SWA O: I > SWA O: I O - OUTPUT IDENTIFIER
A-H = TARGET OUTPUT # =
ALL OUTPUTS
I - INPUT IDENTIFIER 1~8 =
TARGET INPUT
(CHANGE IN THE SIGNAL
STATUS OF OUTPUT A)
< OUT A: CON T
Cut the audio stream on the
indicated Audio Output
> SWA O: 0 > SWA O: 0 O - OUTPUT IDENTIFIER
A-H = TARGET OUTPUT # =
ALL OUTPUTS
> SWA A: 0
< SWA A: 0
Set the volume of the
target Audio Output to the
indicated level
> VOL O: $$ > VOL O: $$ O - OUTPUT IDENTIFIER
A-H = TARGET OUTPUT # =
ALL OUTPUTS
$$ - VOLUME LEVEL
00~60 = VOLUME LEVEL
> VOL A: 30
< VOL A: 30
Increase the volume level of
the target Audio Output
> VOL O: + < VOL O: $$ O - OUTPUT IDENTIFIER
A-H = TARGET OUTPUT # =
ALL OUTPUTS
$$ - VOLUME LEVEL
00~60 = VOLUME LEVEL
> VOL A: 30
< VOL A: 30
Decrease the volume level
of the target Audio Output
> VOL O: - < VOL O: $$ O - OUTPUT IDENTIFIER
A-H = TARGET OUTPUT # =
ALL OUTPUTS
$$ - VOLUME LEVEL
00~60 = VOLUME LEVEL
> VOL A: 30
< VOL A: 30
Enable or disable Mute on
the target Audio Output
> MUT O: B > MUT O: B O - OUTPUT IDENTIFIER
A-H = TARGET OUTPUT # =
ALL OUTPUTS
B - BOOLEAN STATE
T/F = TRUE OR FALSE
> MUT A: T
< MUT A: T
SWITCHING PRESETS
FUNCTION
COMMAND
STRING
FEEDBACK STRING VARIABLES EXAMPLE
Save Preset > PRE #: CALL > PRE #: CALL # - PRESET
1~8 = PRESET INPUT
> PRE 1: CALL
< PRE 1: CALL
Recall Preset > PRE #: SAVE > PRE #: SAVE # - PRESET
1~8 = PRESET INPUT
> PRE 1: SAVE
< PRE 1: SAVE
Set Preset Defalt > PRE #: DFLT > PRE #: DFLT # - PRESET
1~8 = PRESET INPUT
> PRE 1: DFLT
< PRE 1: DFLT
DEVICE SETTINGS
FUNCTION
COMMAND
STRING
FEEDBACK STRING VARIABLES EXAMPLE
Set the audio de-
embedding mode globally
for the device’s audio
outputs
> AEX: P > AEX: P P - DE-EMBEDDING MODE
I = INDEPENTEND
O = FOLLOW OUTPUT
> AEX: I
< AEX: I
Set the lip-sync for each of
device’s audio output
> LIP O: $$$ > LIP O: $$$ O - OUTPUT IDENTIFIER
A-H = TARGET OUTPUT
$$$ - DELAY TIME 000~150 =
MILISECONDS
> LIP A: 100
< LIP A: 100
Set the scaler mode for
each HDMI Output
> SCA O: P > SCA O: P O - OUTPUT IDENTIFIER
A-H = TARGET OUTPUT # =
ALL OUTPUTS
P - SCALER MODE A = AUTO
B = BYPASS
C = COMPRESS FOR HDBT
D = DOWNSCALE TO 1080P
> SCA A: B
< SCA A: B
A NEU VIDEO