10
Web GUI User Guide
Output Page
You can do the following operations on the Output page:
q
OUTPUTS:
Output channel of the device.
w
NAME
: The current output channel’s name. You can modify it by entering the corresponding name (max length: 12 characters) in the
input box.
e
SCALER MODE:
Set the current output resolution mode.
r
CONNECT:
It indicates the connection status of output ports. When the output port is connected to the display, it shows green,
otherwise, it shows gray.
t
SIGNAL:
It indicates whether there is signal input.
y
PROTECTION:
It indicates the HDCP status.
Network Page
Set the Default Network:
Click
“Set Network Defaults”
, there will be a prompt, as shown in the following
figure.
A
NEU
VIDEO