A-Neuvideo ANI-8-4K60-S, Instruction Manual, Page: 19 / 24

17
ASCII CommandS
FUNCTION
COMMAND
STRING
FEEDBACK STRING VARIABLES EXAMPLE
Set the HDCP compliance
mode for each HDMI Output
> DCP O: P > DCP O: P O - OUTPUT IDENTIFIER
A-H = TARGET OUTPUT P -
BOOLEAN STATE
T/F = TRUE OR FALSE
# = ALL OUTPUTS
> SWT A: 0
< SWT A: 0
Set the EDID using Preset
for each HDMI Input
> EDD I: P$ > EDD I: P$ I - INPUT IDENTIFIER 1~8 =
TARGET INPUT
$ - PRESET IDENTIFIER
1~8 = PRESET IDENTIFIER
> EDD 1: P1
< EDD 1: P1
Copy the EDID from a
connected display and set
as EDID for the target Input
> EDD I: LO > EDD I: LO I - INPUT IDENTIFIER 1~8 =
TARGET INPUT
O - OUTPUT IDENTIFIER
A~H = TARGET OUTPUT
> EDD 1: P1
< EDD 1: P1
Set the EDID using User
File for each HDMI Input
> EDD I: U$ < EDD I: U$ I - INPUT IDENTIFIER 1~8 =
TARGET INPUT
$ - USER FILE IDENTIFIER
1~2 = FILE IDENTIFIER
> EDD 1: U1
< EDD 1: U1
Get Network Status > STA: NET < NET: CON B
< NET: P
< NET:
IP $$$.$$$.$$$.$$$
< NET:
MK $$$.$$$.$$$.$$$
< NET:
GW $$$.$$$.$$$.$$$
< NET:
MC $$:$$:$$:$$:$$:$$
B: BOOLEAN STATUS (F / T)
P - DM = DYNAMIC
MODE
SM = STATIC MODE
$$$.$$$.$$$.$$$ IP ADDRESS
$$$.$$$.$$$.$$$ NETWORK
MASK
$$$.$$$.$$$.$$$
GATEWAY
> STA: NET
< NET: CON T
< NET: DM
< NET:
IP 192.168.1.100
< NET:
MK 255.255.255.0
< NET:
GW 192.168.1.1
< NET:
MC 1C:C5:86:10:00:01
Adjust Network Mode
DHCP or Static
> NET: P > NET: P P - DM = DYNAMIC
MODE
SM = STATIC MODE
> NET: DM
< NET: DM
Adjust the unit IP Address > NET: IP
$$$.$$$.$$$.$$$
< NET: IP $$$.$$$.$$$.$$$ $$$.$$$.$$$.$$$ IP ADDRESS > NET: IP 192.168.0.15
Adjust the unit Network
Mask
> NET: MK
$$$.$$$.$$$.$$$
< NET: MK
$$$.$$$.$$$.$$$
$$$.$$$.$$$.$$$ NETWORK
MASK
> NET: MK 255.255.255.0
Adjust the unit Default
Gateway
> NET: GW
$$$.$$$.$$$.$$$
< NET: GW
$$$.$$$.$$$.$$$
$$$.$$$.$$$.$$$ GATEWAY > NET: GW 192.168.0.1
Reboot Network > RBT: NET < RBT: NET REBOOTING
< RBT: NET REBOOT
DONE
Reboot > RBT < REBOOTING
< REBOOT DONE
Reset > RST < RESETING
< RESET DONE
CEC FUNCTIONS
FUNCTION
COMMAND
STRING
FEEDBACK STRING VARIABLES EXAMPLE
Set Display On / Off > CEC O: PWR B > CEC O: PWR B O - OUTPUT IDENTIFIER
B - BOOLEA STATUS (F/T)
> CEC A: PWR T
< CEC A: PWR T
Set Display Mute audio
Output
> CEC O: MUTE > CEC O: MUTE O - OUTPUT IDENTIFIER > CEC A: MUTE
< CEC A: MUTE
Increase Display HDMI
Output volume
> CEC O: VOL + > CEC O: VOL + O - OUTPUT IDENTIFIER > CEC A: VOL +
< CEC A: VOL +
Decrease Display HDMI
Output volume
> CEC O: VOL - > CEC O: VOL - O - OUTPUT IDENTIFIER > CEC A: VOL -
< CEC A: VOL -
A NEU VIDEO