background image

WebGUI Control

HDBaseT™ & H/W Info

This page provides information concerning the 
temperature inside the matrix (Areas 1, 2 & 3) and the 
HDBaseT

 firmware versions used in the matrix and in 

connected receivers. Temperature area 1 is the left side 
of the output ports (from the front), area 2 is the right 
side of the output ports (from the front) and area 3 is at 
the middle of the HDMI inputs.

User Config

The WebGUI and Telnet username/password 
are set on this page. (2) management levels are 

available: 

“Administrator”

 and 

“General User”

. The 

administrator username (

“admin”

) cannot be changed.

The 

“Administrator”

 user has access to change all 

settings. The 

“General User”

 is not permitted to access 

or change information on the EDID Settings or System 
Settings pages.

System Settings

This  page  provides  system  configuration  options 

including turning the power on/off, changing the 
network settings, downloading/restoring saved system 

configurations, resetting the system to factory defaults
and updating the firmware. 

A

  

NEU

VIDEO

29

Summary of Contents for ANI-1082UHD-KIT









































Reviews: