background image

2

INTRODUCTION

INTRODUCTION

This 10x10 HDMI/HDBaseT

 Matrix supports routing and transmission of video (for resolutions up to 4K@60Hz w/ HDMI 2.0 & HDCP 

2.2) and audio (multi-channel digital/stereo analog) while providing flexible control via IR, RS-232, Telnet or WebGUI. As many as (10) 

HD sources may be routed to any of the (8) destinations via a single CAT5e/6/7 cable (up to 328 ft/100M at 1080p or up to 197ft/60M 

at 4K@30Hz). The (2) HDMI 2.0 outputs support transmission of 6G UltraHD HDMI sources (Up to 4K@60Hz YUV 444 (6G)) from any 
HDMI inputs (Up to 4K@60Hz YUV 444 (6G)) or they can mirror any of the HDBaseT

 outputs (Up to 4K@60Hz YUV 420 (3G)) for local 

monitoring. 3D video is also supported when compatible sources and displays are connected. This product supports passing 7.1 channel 
LPCM digital audio as well as advanced bitstream and HD bitstream audio formats. Additionally, (4) analog audio outputs are available to 
provide stereo breakout audio from the associated HDBaseT

 output (LPCM 2.0 sources only).

Beyond basic video routing, this product also incorporates an independent audio matrix with (14) audio outputs and (10) audio inputs. 

Offering discrete audio routing, insertion and extraction, this product makes it possible to have multiple audio zones within your installation. 

Additionally the matrix contains (3) independent audio mixers allowing for applications such as adding music or a voice over to existing 
video. This product supports the Optical Audio Return (OAR) channel feature, found on compatible HDBaseT

™ 

receivers, allowing optical 

audio sources connected to those receivers to be sent back to the matrix unit.

LAN support allows your 100BaseT

 network to be extended to smart TVs or game consoles. Internally generated test patterns (up to 

6G UHD resolutions) are provided to assist with setup, providing a simple way to verify both matrix and sink functionality. The Power over 
HDBaseT

 (PoH) function can power compatible receivers, providing greater flexibility in your installations. Control via manual selection 

buttons, WebGUI, Telnet, RS-232 or IR remote.

The HDMI over single CAT5e/6/7 Receiver is a great solution to extend uncompressed Audio/Video and IP data over a single CAT5e/6/7 
cable at a distance up to 328ft (100M). Multi-control interfaces are available which includes IR, RS-232, USB and LAN connection. This 
extender set complies with advanced protocols of HDCP 2.2 and HDMI 2.0, and HDCP 1.4 is also supported. 6G HDMI video supports 
and extends 4K2K data with features like “Optical Audio Return” which supports audio from the Receiver back to the ANI-1082UHD. The 
“audio insertion” allows you to insert external audio into HDMI video for applications such as background music insertion. HDBaseT clock 
stretch and TMDS re-clocking are also supported. The Receiver can be powered via the PoE 48V function of the ANI-1082UHD, allowing 

for greater flexibility to fit different installation scenarios. These products have a 3 year warranty.

PACKAGE CONTENTS

Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:

• 

ANI-1082UHD 10x10 HDMI and HDBaseT

 Matrix with Audio Matrixing

• 

ANI-9251RX HDMI over CAT5e/6/7 Receiver

• 

Remote Control (ANI-163)

• 

(3) IR Extender Cable

• 

(3) IR Blaster Cable

• 

(2) 24V/6.25A DC Power Adaptor

• 

48V/0.83A DC power adapter

• 

(3) Power Cord

• 

RS-232 terminal (Phoenix Connector)

• 

Audio terminal (Phoenix Connector)

• 

(1) Rack Ear Set

• 

Users Guide

A

  

NEU

VIDEO

Summary of Contents for ANI-1082UHD-KIT









































Reviews: