A-iPower 851217006299, Owner'S Manual And Operating Instructions

Page: 12 / 120

SETUP 10
ASSEMBLY:
FOR TECHNICAL QUESTIONS, PLEASE CALL 1-855-888-3598
1. Take out the end cap in the frame,attach
the handle on to the frame by inserting
the clip.
See Figure A.
Figure A
2. Attach the gun holder to the handle,rotate
the holder to get a comfortable angle and
then tighten the knob by hand.
See Figure B
Figure B
3. Insert the hose holder into the holes on
the back of panel.
See Figure C.
Figure C
4. Connect the Pressure Hose to the Pump
RXWOHW¿WWLQJDQGWLJKWHQWKHQXW¿UPO\E\
hand, DO NOT use any tool to tighten.
See Figure D
.
Figure D
5. Connect the Pressure Hose to the
handle of the Spray Gun and tighten the
QXW¿UPO\E\KDQG
See Figure E.
Figure E
6. Remove the protective cap on the Wand
Wand
Spray Gun Tip
inlet. Insert the Wand into the Spray Gun
WLSDQGWLJKWHQWKHQXW¿UPO\E\KDQG
See Figure F.
Figure F