A-image AWS-IR, Installation Manual

Page: 8 / 70

8
INSTALLATION
Connecting the camera
Using a standard Ethernet network cable, connect the camera to your network (depending on your own
setup, this may be to your router or switch). see figure below
Connect the included power adapter to the power port on the camera and the other end into an electrical
socket.
see figure below
Check that the power indicator is lit on the front of the camera.
Note:
Please handle the power adapter carefully to avoid the risk of accidental electric shock.
Camera Setup Installation & Usage
The camera Setup utility can easily and quickly detect cameras connected to your local network and list them
on the Camera Setup window, also you can use the camera Setup utility to assign an IP address to each
camera.