8
GIGASYNC MANUAL
VER. 3 REV. 1
Base unit
The base unit can house up to 3 cartridges in the housings provided.
On the front are visible the OPT function button and the 3 LED monitors: SYNC, STATUS, and ALARM. To install the
cartridges, we simply have to remove the metal cover and insert the desired cartridge
fixing it to the base with screws
(supplied with each cartridge).
In this connector, it is possible to connect an external GPS antenna that will be used to generate the synchronization pulses.
Grounding connector to protect people and equipment. For the correct operation of the dischargers, it is necessary to
connect the ground terminal GND.
Can be seen in the redundant power supply connectors of the base unit and the respective cartridges. Each supply is
independent, isolated, and equipped with reverse polarity protection. They have a power indicator LED.
It also has SYNC INPUT and SYNC OUTPUT ports used respectively to acquire or replicate the synchronous pulse.
The base unit can also be powered via the Ethernet connector, compatible with passive PoE.
4
BASE UNIT
ANTENNA CONNECTOR
6
GROUNDING
7
POWER SUPPLY
8
SYNC PORTS
9
ETHERNET PORT
Figure 2 – Base unit empty with metal covers installed
Figure 3 – Rear view of the base unit
4
5
7
8
9
6
5
