![background image](http://html1.mh-extra.com/html/909/20vltg/20vltg_instruction-manual_445908019.webp)
19
Trouble shooting
Problem
Solution
Line will not feed
Check:
• Both Lines are correctly routed through Eyelets.
• Lines are not crossing each other and lines are in there own spool section
• When Bumping, ensure spool is running at full speed.
Poor cutting performance
Check:
• Both lines are fully extended. If not, bump feed until lines are trimmed on the guard cutter.
• Maker smaller cuts. This is a light duty trimmer.