Showmaster Overview
Medialon Showmaster User Manual
p 35 of 42
M569-3 | June 2023
Electrical
Before connecting mains power to the unit’s power supply unit (PSU), ensure the electricity supply
is compatible with the electrical ratings shown here and on the power supply product label.
The power supply unit is connected to, and disconnected from, the mains supply
with an IEC 60320 power connector.
2.5.8
Maintenance
Air Filter
It is important to remove and clean or replace the filter periodically to avoid overheating.
Showmaster Go units are supplied with one spare filter pad, others can be provided by your
supplier. Showmaster Go should not be run without filters, since accumulations of dust inside the
unit can affect performance.
Cleaning
External casing and the front panel should be carefully wiped with a soft cloth and antistatic
solution.
Showmaster Go internal maintenance
Showmaster Go contains no user-serviceable parts. For CMOS battery replacement please
contact your supplier for further instructions.
Warning
: Do not operate the unit with any covers removed as the air flow through the unit
may be compromised leading to overheating.
Any alterations to the product’s specification, including additional/alternative components, BIOS
changes, overclocking, etc., may invalidate the warranty or impact the unit’s performance.
Additionally, such changes or modifications could cause equipment no longer to comply with the
relevant EMC regulations, and void the user’s authority to operate the equipment. If in doubt,
please contact your supplier.
2.6
Disposal Information: All Showmaster Devices
Waste Electrical and Electronic Equipment
Dispose of the equipment and any components in accordance with all local and national
safety and environmental requirements.
This symbol on the product indicates that, under the European Directive 2012/19/EU
governing waste from electrical and electronic equipment, this product must not be
disposed of with other municipal waste. Please dispose of your waste equipment by
handing it over to a designated collection point for the recycling of waste electrical and electronic
equipment. To prevent possible harm to the environment or human health from uncontrolled